Introduction
If you want to simulate how air flows over a wing, water moves through a pipe or heat spreads through a device — without paying thousands of dollars for commercial simulation software — OpenFOAM is the free tool that does it. It is a free and open-source computational fluid dynamics package from the OpenFOAM Foundation, used by engineers, researchers and students around the world, and it costs nothing to download. Version 14 was released in July 2026, and it runs on Windows through WSL with the same Ubuntu packages used on Linux.
This guide explains what OpenFOAM is, what it can and cannot do, what your PC needs to run it, and how to download and install it from the official website only. You will also get a first-use walkthrough that takes you from installation to your first finished simulation in a few minutes. By the end, you should be able to install OpenFOAM on Windows and run a real case.
OpenFOAM is best for fluid flow simulation, aerodynamics, heat transfer, multiphase flows and learning how computational fluid dynamics works. Because it is free and legitimate, you do not need a cracked copy or an unknown download site. The official website provides the download, and the free software is a real, permanent tool, not a short trial.

What Is OpenFOAM?
OpenFOAM is a free and open-source toolbox for computational fluid dynamics, usually shortened to CFD. In simple terms, it is a collection of solvers, meshing tools and post-processing utilities that let you simulate how fluids — air, water and other liquids and gases — behave around objects and inside devices. You describe your geometry and your flow conditions, OpenFOAM divides the space into a mesh of small cells, and its solvers calculate the pressure, velocity and temperature in every cell, so you can see how a design will perform before you build it.
What makes OpenFOAM useful is its power and its openness. Because it is released under the GNU General Public Licence version 3, the full source code is available to read, modify and share, and because it is developed in the open by the OpenFOAM Foundation, it is trusted in universities and industry alike for real engineering work. The package includes mesh generators such as blockMesh and snappyHexMesh, a wide range of solvers for different kinds of flow, and tools that work with ParaView for visualising results. Three honest notes: OpenFOAM is a professional engineering tool with a steep learning curve, so expect to study its tutorials before your first real project; on Windows it runs through WSL using the Ubuntu package, not as a native Windows application, so you need to be comfortable with a Linux command line; and it is a simulation toolbox, not a CAD program, so you build or import your geometry with other tools.
Key Features
- Completely free and open source: Completely free and open source under the GNU General Public Licence version 3, with the full source code available to everyone.
- Full CFD solver collection: Full CFD solver collection covering incompressible and compressible flow, heat transfer, turbulence, multiphase flow and more.
- Built-in meshing tools: Built-in meshing tools such as blockMesh and snappyHexMesh turn your geometry into a simulation-ready mesh.
- ParaView visualisation: ParaView visualisation lets you explore your results as colourful 3D fields, streamlines and cut planes.
- Runs on Windows via WSL: Runs on Windows via WSL using the official Ubuntu package, so Windows users get the same version as Linux users.
- Active development: Active development by the OpenFOAM Foundation, with version 14 released in July 2026 and regular patch releases.
- Extensible in C++: Extensible in C++ with a well-documented code base, so you can write your own solvers and boundary conditions.
- Free with no licence limits: Free with no licence limits on cores, cases or commercial use, so your simulations can grow without extra cost.
System Requirements
- Operating System: Windows 10 or 11, 64-bit, with WSL and Ubuntu installed for the Windows installation method
- Processor: A modern multi-core processor or better, since simulations use many cores at once
- RAM: At least 8 GB of RAM for basic use, 16 GB or more recommended for realistic 3D cases
- Storage: At least 10 GB of free disk space for WSL, Ubuntu, OpenFOAM and your first cases
- Software: WSL with Ubuntu from the Microsoft Store, since the Windows installation uses the Ubuntu package
- Other: A stable internet connection for the WSL and package downloads, and patience for the first setup, since CFD has a learning curve
These are practical, modern Windows guidelines, not a word-for-word copy of an official specification table. The most important point is simple: OpenFOAM is designed for capable Windows PCs, and a modern multi-core computer is enough to start.
How to Download OpenFOAM (Official Method)
The only safe place to download OpenFOAM is the official website. Do not download it from random file mirrors or “free download” portals, because those copies may be outdated or bundled with unwanted software. The official site is the source of truth for the current version.
Official download link: https://openfoam.org/download/
On the official OpenFOAM Foundation site, open the download page and choose the Windows option. OpenFOAM runs on Windows using WSL with a convenient installation of the Ubuntu package, and the download page links to the step-by-step Windows instructions. The download is completely free, and the software is distributed only under the GNU General Public Licence version 3. If a site asks you to pay for OpenFOAM, or offers a cracked version of it, leave that site and return to the official OpenFOAM site.
Step-by-Step Installation
Follow these steps in order. On Windows, OpenFOAM installs inside WSL with Ubuntu, so you set up WSL first and then install the OpenFOAM Ubuntu package inside it. The download is free with no account or serial number involved at any point. Take your time with the WSL and package steps, because those are the steps that most often cause the installation to fail.
- Enable WSL on Windows — Open PowerShell as administrator and run the command to install WSL with Ubuntu, then restart your PC when asked, so Windows can run Linux.
- Open Ubuntu in WSL — Open the Ubuntu app from the Start menu, create your Linux username and password, and update the package lists so the system is ready.
- Download OpenFOAM from the official site — Open https://openfoam.org/download/ in your browser and follow the Windows instructions, which use the official Ubuntu package. Do not use third-party download sites.
- Add the OpenFOAM package repository — Inside the Ubuntu terminal, add the OpenFOAM Foundation package repository exactly as the official Windows instructions describe, so you can install the signed packages.
- Install the OpenFOAM package — Install the OpenFOAM version 14 package from the repository, and wait for the download and installation to finish.
- Set up the OpenFOAM environment — Source the OpenFOAM environment script in your shell as the official instructions describe, so the OpenFOAM commands become available.
- Test the installation — Run a test command such as foamInstallationTest in the Ubuntu terminal, and confirm it reports a working installation before you start a real case.
Tip: Follow the official Windows instructions on the OpenFOAM download page exactly, including the repository setup, because a missed step is the most common cause of a broken install. If a command is not found after installation, check that you sourced the environment script in the same terminal session.
How to Run Your First Simulation with OpenFOAM
This walkthrough is a simple first project. It is not a full course, but it will help you see OpenFOAM working on a real case and learn how its workflow is organised.
- Copy a tutorial case — Copy one of the bundled tutorial cases, such as the cavity flow tutorial, into your working folder, so you start from a known-good setup.
- Inspect the case folders — Open the case folders and look at the mesh, boundary condition and solver settings, so you understand what each file controls.
- Generate the mesh — Run blockMesh inside the case folder, so OpenFOAM builds the computational mesh for your geometry.
- Check the mesh — Run checkMesh to confirm the mesh is valid, so a bad mesh does not waste a simulation run.
- Run the solver — Run the solver named in the tutorial, such as icoFoam, and watch the terminal output until the run finishes.
- Open the results in ParaView — Open the case results in ParaView, so you can see the velocity and pressure fields as colourful 3D plots.
- Change one setting and rerun — Change a single setting, such as the inlet velocity, and run the case again, so you can see how the results respond to your input.
Is OpenFOAM Free?
OpenFOAM is completely free and open source from the OpenFOAM Foundation, distributed only under the GNU General Public Licence version 3. You download it from the official OpenFOAM site, install it, and use it without paying and without a time limit, including for commercial work, with no limits on cores, cases or users. Be aware of three honest limits: OpenFOAM is a professional engineering tool with a steep learning curve, so expect to study its tutorials before your first real project; on Windows it runs through WSL using the Ubuntu package, not as a native Windows application, so you need to be comfortable with a Linux command line; and it is a simulation toolbox, not a CAD program, so you build or import your geometry with other tools.
That free status is important for this guide. All the steps here use the official download only, and they do not involve cracks, activators or licence keys. If you ever see a site offering a paid or cracked version of the free software, treat it as unsafe and return to the official site.
Frequently Asked Questions
Is OpenFOAM safe to download? Yes, when you download it from the official website only. The official packages are the versions made by the OpenFOAM Foundation. Avoid third-party sites that bundle extra software or ask for payment for free software.
Does OpenFOAM work on my Windows PC? Yes, in most cases. OpenFOAM runs on Windows 10 and 11 through WSL using the official Ubuntu package, and the download page has dedicated Windows instructions. Check the test command output after installation to confirm it works.
Is OpenFOAM really free, or will it stop working? The free version described in this guide is not a short trial. OpenFOAM is free and open-source software under the GPLv3 licence, and it stays usable after installation with no licence fees at any scale.
Do I need a powerful PC to run OpenFOAM? For learning, no — a modern Windows 10 or 11 PC with 8 GB of RAM can run the tutorial cases. Realistic 3D simulations with fine meshes will benefit from many cores and much more RAM, but you can start and learn on a normal home PC.
Conclusion
OpenFOAM is a useful, free addition to a Windows setup because it is a free and open-source CFD package from the OpenFOAM Foundation, which simulates fluid flow, heat transfer and aerodynamics at a professional level, and it can be downloaded safely from the official site. Start with the bundled tutorials, learn one solver at a time, and build your own simulations as you get comfortable.
To get started, download OpenFOAM from the official website here: https://openfoam.org/download/ Install it with the steps above, test it once, and then use it in your next project. With a little practice, it can become a regular part of your workflow.
Official download link: https://openfoam.org/download/
Related Guides
- Stencyl for PC: How to Download & Install on Windows
- Chunky for PC: How to Download & Install on Windows