Introduction
If you want to clean hiss, hum and background noise out of your recordings without paying for a noise reduction plugin, Bertom Denoiser Classic is the free plugin that does it. It is a free zero-latency noise reduction plugin from Bertom Audio, with no FFT and no artefacts, and it is one of the most respected free denoisers you can get. It is provided under a pay-what-you-want system, including for free, so you can download it from the official Bertom Audio site without paying anything. Denoiser Classic runs on Windows 7 and higher in VST3 and AAX formats, and it works on music, voice and live audio, not just on speech.
This guide explains what Bertom Denoiser Classic is, what it can and cannot do, what your PC needs to run it, and how to download and install it from the official website only. You will also get a first-use walkthrough that takes you from installation to a working result in a few minutes. By the end, you should be able to install Bertom Denoiser Classic on Windows and use it in a real project.
Bertom Denoiser Classic is best for removing hiss and hum from recordings, cleaning noisy guitar and vocal tracks, and live noise reduction without latency. Because it is free and legitimate, you do not need a cracked copy or an unknown download site. The official website provides the installer, and the free version is a real, permanent tool, not a short trial.

What Is Bertom Denoiser Classic?
Bertom Denoiser Classic is a free noise reduction plugin that runs inside your DAW on an audio track. In simple terms, it is a plugin that you load as an insert effect on a noisy recording, and it removes the background hiss and hum while keeping the sound you want: set the threshold, adjust the reduction, and listen. Unlike most denoisers, it uses no FFT, so it does not add the watery artefacts and smearing that FFT denoisers often cause, and because it has zero latency, you can use it on a live input without any delay. It works on any sound, not just voice, so you can clean a noisy guitar amp, a humming synth, a field recording or a podcast vocal with the same plugin.
What makes Denoiser Classic useful is its cleanliness and its simplicity. Because it works without FFT, the cleaned sound stays natural and clear, and because it has a traditional workflow with just a few controls, you can dial in a clean sound in seconds instead of learning a complex interface. It is freeware from Bertom Audio, with no account needed. Three honest notes: Denoiser Classic is the free version, and the paid Denoiser Pro adds more features, so the free version does not include those; it reduces noise, it does not remove it perfectly, so a very noisy recording will still have some noise left after cleaning; and it is a plugin, not a standalone app, so you need a DAW to run it.
Key Features
- Zero-latency noise reduction: Zero-latency noise reduction cleans audio in real time, so you can use it on live inputs without delay.
- No FFT artefacts: No FFT means no watery artefacts or smearing, so the cleaned sound stays natural and clear.
- Works on any sound: Works on any sound, not just voice, so it cleans guitars, synths, field recordings and podcasts too.
- Traditional workflow: A traditional workflow with a few clear controls dials in a clean sound in seconds.
- Low CPU usage: Low CPU usage lets you run Denoiser Classic on many tracks at once without slowing your DAW.
- Fully automatable: Fully automatable controls let your DAW change the noise reduction over a song.
- Music and post-production ready: Music and post-production ready, Denoiser Classic fits songs, podcasts, video audio and live use.
- Free with no time limit: Denoiser Classic is free with no time limit under the pay-what-you-want system, and it stays usable forever.
System Requirements
- Operating System: Windows 7 or higher, 64-bit
- Processor: A modern dual-core processor or better
- RAM: At least 4 GB of RAM for basic use
- Storage: Around 50 MB of free disk space for the download and plugin files
- DAW: Any DAW that supports VST3 or AAX plugins on Windows, such as Reaper, FL Studio, Ableton Live, Cubase or Studio One
- Other: A stable internet connection for the download, a noisy audio track to clean, and speakers or headphones to hear your audio
These are practical, modern Windows guidelines, not a word-for-word copy of an official specification table. The most important point is simple: Bertom Denoiser Classic is designed for normal Windows PCs, and a modest modern computer is enough to start.
How to Download Bertom Denoiser Classic (Official Method)
The only safe place to download Bertom Denoiser Classic is the official website. Do not download it from random file mirrors or “free download” portals, because those copies may be outdated or bundled with unwanted software. The official site is the source of truth for the current version.
Official download link: https://www.bertomaudio.com/denoiser-classic.html
On the official Bertom Audio site, open the Denoiser Classic page and choose the download. Denoiser Classic is provided under a pay-what-you-want system, including for free, so you can enter 0 at the download checkout and download the Windows ZIP archive to your Downloads folder without paying anything. There is no account or serial number involved at any point. If a site asks you to pay for Denoiser Classic, or offers a cracked version of it, leave that site and return to the official Bertom Audio site.
Step-by-Step Installation
Follow these steps in order. Denoiser Classic comes as a ZIP archive, not a normal installer, so you copy the plugin file into your VST folder yourself. The download is pay-what-you-want, including free, so you can enter 0 at the checkout. Take your time with the format and folder choices, because those are the steps that most often cause a plugin to not appear in a DAW.
- Download the ZIP from the official site — Open https://www.bertomaudio.com/denoiser-classic.html in your browser and download the Windows ZIP archive for Bertom Denoiser Classic. Choose the free pay-what-you-want option at the download checkout. Do not use third-party download sites.
- Extract the ZIP archive — Right-click the downloaded ZIP file and choose Extract All, then open the extracted folder to find the plugin files.
- Copy the plugin file to your VST folder — Copy the 64-bit VST3 plugin file into your DAW’s VST plugin folder, such as C:\Program Files\Common Files\VST3.
- Keep the manual nearby — The ZIP also contains the user manual. Keep it in the same folder so you can read it later.
- Restart your DAW if it was open — Close and reopen your DAW so it can scan the new plugin folder on startup.
- Rescan plugins in your DAW — Open your DAW plugin manager and rescan, so the new plugin appears in the list.
- Load the plugin once to test it — Insert Bertom Denoiser Classic on a test track and confirm it opens without an error before you use it in a real project.
Tip: Set the threshold so the denoiser only works when the noise is audible, and keep the reduction gentle at first, so the sound stays natural. If your DAW cannot find the plugin after installation, check the plugin folder path in your DAW settings first, then rescan.
How to Clean Your First Noisy Track with Bertom Denoiser Classic
This walkthrough is a simple first project. It is not a full course, but it will help you hear Bertom Denoiser Classic working in a real track and learn its main controls.
- Create an audio track with noise — Add a track with a noisy recording, such as a vocal with hiss or a guitar with amp hum.
- Insert Denoiser Classic on the track — Add Denoiser Classic as an insert effect on the noisy track, so it processes the audio first.
- Find a noisy section — Find a section with only noise and no wanted sound, so you can hear what the denoiser removes.
- Set the threshold — Set the threshold so the denoiser works on the noise but leaves quiet wanted sounds alone.
- Adjust the reduction — Adjust the reduction amount until the hiss fades without making the sound dull or watery.
- Check the whole track — Play the whole track, so you can hear that the wanted sound still sounds natural.
- Bounce the cleaned audio — Bounce the track to audio, so you can use the cleaned recording in your song.
Is Bertom Denoiser Classic Free?
Bertom Denoiser Classic is freeware from Bertom Audio, provided under a pay-what-you-want system, including for free. You download it from the official Bertom Audio site, install it, and use it without paying and without a time limit. You can pay something only if you want to support the developer. Be aware of three honest limits: Denoiser Classic is the free version, and the paid Denoiser Pro adds more features, so the free version does not include those; it reduces noise, it does not remove it perfectly, so a very noisy recording will still have some noise left after cleaning; and it is a plugin, not a standalone app, so you need a DAW to run it. Denoiser Classic runs on Windows 7 and higher in VST3 and AAX formats.
That free status is important for this guide. All the steps here use the official download only, and they do not involve cracks, activators or licence keys. If you ever see a site offering a paid or cracked version of the free plugin, treat it as unsafe and return to the official site.
Frequently Asked Questions
Is Bertom Denoiser Classic safe to download? Yes, when you download it from the official website only. The official installer is the version made by the developer. Avoid third-party sites that bundle extra software or ask for payment for a free plugin.
Does Bertom Denoiser Classic work on my Windows PC? Yes, in most cases. Bertom Denoiser Classic works as VST3 and AAX on Windows, and it loads in major DAWs that support those formats, such as Reaper, FL Studio, Ableton Live, Cubase and others. Check your DAW plugin list after installation and rescan if needed.
Is Bertom Denoiser Classic really free, or will it stop working? The free version described in this guide is not a short trial. It stays usable after installation. The paid Denoiser Pro adds more features.
Do I need a powerful PC to run Bertom Denoiser Classic? No, not for basic use. A modern Windows 10 or 11 PC with 4 GB of RAM or more can run it for simple projects. Larger projects with many tracks and plugins will benefit from more RAM and a faster processor, but you can start and learn on a normal home PC.
Conclusion
Bertom Denoiser Classic is a useful, free addition to a Windows setup because it is a free zero-latency noise reduction plugin from Bertom Audio, which cleans hiss and hum from music, voice and live audio without FFT artefacts, and it can be downloaded safely from the official site. Start with presets, learn one control at a time, and build your own sounds as you get comfortable.
To get started, download Bertom Denoiser Classic from the official website here: https://www.bertomaudio.com/denoiser-classic.html Install it with the steps above, test it once, and then use it in your next project. With a little practice, it can become a regular part of your workflow.
Official download link: https://www.bertomaudio.com/denoiser-classic.html
Related Guides
- Klanghelm IVGI for PC: How to Download & Install on Windows
- Auburn Sounds Graillon 3 for PC: How to Download & Install on Windows