Introduction
If you want a free delay that sounds like an old tape machine instead of a clean digital echo, Variety of Sound NastyDLA is the plugin for you. It is a free characterful tape delay and chorus plugin from Variety of Sound, with oversampling and VST3 support in the current mkIII version, and it is one of the most loved free delays you can get. There is no payment, no account and no serial number, and the download from the official Variety of Sound site is the complete plugin.
This guide explains what Variety of Sound NastyDLA is, what it can and cannot do, what your PC needs to run it, and how to download and install it from the official website only. You will also get a first-use walkthrough that takes you from installation to a working result in a few minutes. By the end, you should be able to install Variety of Sound NastyDLA on Windows and use it in a real project.
Variety of Sound NastyDLA is best for warm tape delays, slapback echoes, and chorus-drenched guitar and vocal effects. Because it is free and legitimate, you do not need a cracked copy or an unknown download site. The official website provides the installer, and the free version is a real, permanent tool, not a short trial.

What Is Variety of Sound NastyDLA?
NastyDLA is a free delay effect that runs inside your DAW on any audio track or bus. In simple terms, it is a plugin that you load as an insert or send effect, and it repeats your sound like a tape echo: set the delay time and the feedback, and hear warm, slightly wobbly repeats that melt into the mix, with a chorus mode that thickens the sound further. You load it on a vocal or a guitar, dial in the echo, and hear the space appear.
What makes NastyDLA useful is its character and its flexibility. Because it is modelled on tape delay, its repeats have a warm, saturated colour that clean digital delays cannot match, and because the mkIII update adds oversampling and VST3 support, it sounds better than ever on a modern DAW. It is freeware from Variety of Sound, with no account needed. Three honest notes: NastyDLA is Windows-only, with no Mac version; it comes as a ZIP archive with no installer, so you copy the plugin files into your DAW plugin folder yourself; and it is a character delay, not a precise tempo-synced utility, so for exact millisecond delays, a clean digital delay is the better tool.
Key Features
- Tape delay character: A tape delay character gives warm, saturated repeats that melt into the mix.
- Chorus mode: A chorus mode thickens guitars and vocals with modulated, wobbly delays.
- Oversampling in mkIII: Oversampling in mkIII keeps the delay clean and musical at high sample rates.
- Feedback control: A feedback control sets how many repeats you hear, from one slapback to endless echoes.
- Delay time control: A delay time control sets the echo from tight slapback to long, dreamy repeats.
- Tape saturation: Tape saturation colours each repeat, so later echoes get darker and warmer.
- VST and VST3 formats: VST and VST3 formats in 64-bit cover every modern Windows DAW.
- Free and complete: NastyDLA is free and complete, with no paid edition and no time limit.
System Requirements
- Operating System: Windows 10 or Windows 11, 64-bit
- Processor: A modern dual-core processor or better
- RAM: At least 4 GB of RAM for basic use
- Storage: Around 30 MB of free disk space for the download and plugin files
- DAW: Any DAW that supports VST or VST3 plugins on Windows, such as Reaper, FL Studio, Ableton Live, Cubase or Studio One
- Other: A stable internet connection for the download, and speakers or headphones to hear your audio
These are practical, modern Windows guidelines, not a word-for-word copy of an official specification table. The most important point is simple: Variety of Sound NastyDLA is designed for normal Windows PCs, and a modest modern computer is enough to start.
How to Download Variety of Sound NastyDLA (Official Method)
The only safe place to download Variety of Sound NastyDLA is the official website. Do not download it from random file mirrors or “free download” portals, because those copies may be outdated or bundled with unwanted software. The official site is the source of truth for the current version.
Official download link: https://varietyofsound.wordpress.com/
On the official Variety of Sound site, open the NastyDLA mkIII post and download the Windows ZIP archive to your Downloads folder. There is no account, serial number or payment involved at any point. The ZIP contains the plugin files, which you copy into your DAW plugin folder yourself. If a site asks you to pay for NastyDLA, or offers a cracked version of it, leave that site and return to the official Variety of Sound site.
Step-by-Step Installation
Follow these steps in order. Take your time with the format and folder choices, because those are the steps that most often cause a plugin to not appear in a DAW.
- Download the ZIP from the official site — Open https://varietyofsound.wordpress.com/ in your browser and download the Windows ZIP archive for Variety of Sound NastyDLA. Do not use third-party download sites.
- Extract the ZIP archive — Right-click the downloaded ZIP file and choose Extract All, then open the extracted folder to find the plugin files.
- Copy the plugin files to your VST folder — Copy the plugin files (for example the 64-bit VST3 file) into your DAW’s VST plugin folder, such as C:\Program Files\Common Files\VST3. For the VST2 version, use your DAW’s VST2 folder instead.
- Keep the manual nearby — The download includes a manual. Keep it in the same folder so you can read it later.
- Restart your DAW if it was open — Close and reopen your DAW so it can scan the new plugin folder on startup.
- Rescan plugins in your DAW — Open your DAW plugin manager and rescan, so the new plugin appears in the list.
- Load the plugin once to test it — Insert Variety of Sound NastyDLA on a test track and confirm it opens without an error before you use it in a real project.
Tip: NastyDLA is Windows-only and comes as a ZIP archive, not an installer. If your DAW cannot find the plugin after installation, check the plugin folder path in your DAW settings first, then rescan.
How to Add Your First Tape Echo with Variety of Sound NastyDLA
This walkthrough is a simple first project. It is not a full course, but it will help you hear Variety of Sound NastyDLA working in a real track and learn its main controls.
- Create a track with a vocal or guitar — Add a track with a recorded vocal or guitar that needs space and echo.
- Insert NastyDLA on the track — Add NastyDLA as an insert effect on the track.
- Set a short delay time — Set a short delay time, so the echo sounds like a tight slapback.
- Turn up the feedback — Turn up the feedback a little, so you hear a few warm repeats after each note.
- Try the chorus mode — Switch on the chorus mode, so the delay gains a wobbly, modulated character.
- Balance the mix level — Turn the mix control down, so the echo sits just behind the dry sound.
- Save the setting as a preset — When you like the echo, save it as a preset so you can reuse it on other tracks.
Is Variety of Sound NastyDLA Free?
NastyDLA is freeware from Variety of Sound. You download it from the official Variety of Sound site, install it, and use it without paying and without a time limit. There is no paid version of NastyDLA itself. Be aware of three honest limits: it is Windows-only, with no Mac version; it comes as a ZIP archive with no installer, so you copy the plugin files into your DAW plugin folder yourself; and it is a character delay, not a precise tempo-synced utility, so for exact millisecond delays, a clean digital delay is the better tool. The current version is NastyDLA mkIII, released in September 2023, with oversampling and VST3 support.
That free status is important for this guide. All the steps here use the official download only, and they do not involve cracks, activators or licence keys. If you ever see a site offering a paid or cracked version of the free plugin, treat it as unsafe and return to the official site.
Frequently Asked Questions
Is Variety of Sound NastyDLA safe to download? Yes, when you download it from the official website only. The official installer is the version made by the developer. Avoid third-party sites that bundle extra software or ask for payment for a free plugin.
Does Variety of Sound NastyDLA work on my Windows PC? Yes, in most cases. Variety of Sound NastyDLA works as VST and VST3 on Windows, and it loads in major DAWs that support those formats, such as Reaper, FL Studio, Ableton Live, Cubase and others. Check your DAW plugin list after installation and rescan if needed.
Is Variety of Sound NastyDLA really free, or will it stop working? The free version described in this guide is not a short trial. It stays usable after installation. There is no paid edition of NastyDLA itself.
Do I need a powerful PC to run Variety of Sound NastyDLA? No, not for basic use. A modern Windows 10 or 11 PC with 4 GB of RAM or more can run it for simple projects. Larger projects with many tracks and plugins will benefit from more RAM and a faster processor, but you can start and learn on a normal home PC.
Conclusion
Variety of Sound NastyDLA is a useful, free addition to a Windows setup because it is a free characterful tape delay and chorus plugin with oversampling for warm echoes, slapback and modulated delays, and it can be downloaded safely from the official site. Start with presets, learn one control at a time, and build your own sounds as you get comfortable.
To get started, download Variety of Sound NastyDLA from the official website here: https://varietyofsound.wordpress.com/ Install it with the steps above, test it once, and then use it in your next project. With a little practice, it can become a regular part of your workflow.
Official download link: https://varietyofsound.wordpress.com/
Related Guides
- Valhalla Freq Echo for PC: How to Download & Install on Windows
- Chow Tape Model for PC: How to Download & Install on Windows